控制電纜KVVP介紹：銅芯聚氯乙烯絕緣聚氯乙烯護套編織屏蔽控制電纜，敷設在室內，電纜溝、管道等要求屏蔽的固定場合，多適用于信號干擾較大地區。

Control cable KVVP introduction: copper conductor PVC insulated PVC sheathed braiding shielding control cable, laid in the interior, the fixed place cable channel, pipe shield is required, more suitable for large area signal interference.

用于交流額定電壓450V/750V及以下控制監控回路及保護線路等場合。其中屏蔽型控制電纜，由于具有良好的評比性能得到電廠、電站的大量使用，電纜意義敷設在市內、電纜溝、管道、直埋、豎井等能承受較大機械拉里的固定場合。

For AC rated voltage 450V/750V and below control monitoring and protection of the loop line and so on. The shielded control cable, due to extensive use of good performance obtained with rating, power cable laying, fixed occasions significance can bear larger mechanical Larry in the city, cable trench, pipeline, directly buried, shaft etc..

產品執行GB/T9330-2008國家標準。

Product implementation of national standards GB/T9330-2008.

控制電纜KVVP標準和結構

The KVVP standard and the structure of control cable

導體材料：銅導體、分(1類獨股導體、2類7根交合導體)

Conductor material: copper conductor, division (Class 1, 2 class 7 single stranded conductor root overlapping conductor)

絕緣材料：聚氯乙烯絕緣加數字編碼

Insulating materials: polyvinyl chloride insulated with digital coding

填充材料：塑料填充物

Filling material: plastic filler

屏蔽材料：銅絲屏蔽

Shielding materials: copper wire shielding

護套材料：聚氯乙烯護套

The sheath material: PVC sheath

額定電壓：450/750V

Rated voltage: 450/750V

控制電纜KVVP使用特性

Using the characteristics of KVVP control cable

1、電纜導體的長期允許工作溫度為70℃。

1, the cable conductor allowed working temperature of 70 DEG C.

2 、電纜的敷設溫度應不低于0 ℃，推薦的允許彎曲半徑：無鎧裝層的電纜，應不小于電纜外徑的6 倍。有鎧裝或銅帶屏蔽結構的電纜，應不小于電纜外徑的12倍。有屏蔽層結構的軟電纜，應不小于電纜外徑的6 倍。

2, cable laying temperature should not lower than 0 DEG C, recommended bending radius: non armoured cable, not less than 6 times of cable diameter. Cable armoured or copper tape shielding structure, shall be not less than 12 times of cable diameter. For screened flexible cable, shall be not less than 6 times of cable diameter.

控制電纜KVVP基本型號說明

Control cable KVVP basic model description